Process description to come.
Costs description to come.
Application description to come.
THE SUCCESS OR FAILURE WILL BE DEPENDENT ON FIVE THINGS
Whether you choose Hydroseeding, Drill seeding, broadcast seeding, or sod you need the following:
- Watering
- Mowing
- Fertilizer
- Weed Control
- Weather (warmth)
WATERING
Your hydroseeding or hydromulching application contains grass seed that requires a continuous supply of warmth and moisture. This moisture must come from rainfall or watering. It is not likely that it will rain every day for the following weeks, so be sure to water frequently enough to keep moisture in the soil. A new lawn should be watered each day for the first 2 weeks, with a watering cycle of 15-60 minutes for each watering period (depending on area size and sprinkler type).
The lawn should be kept lightly damp and water should never run or puddle on the lawn. Watch the weather and adjust your watering to keep the mulch lightly damp, not soaking wet and muddy. Sitting water that has been allowed to pool from overwatering will damage grass seed. Once the first mowing is completed, watering is adjusted to 2-3 times per week, and applied heavier. Most customers will actually use much less water establishing a new hydroseeded lawn when compared to the watering requirements needed to establish sod.
MOWING
A new lawn should be mowed as soon as the grass blades are approximately 3-4 inches high. Delaying the first cutting will only encourage weed growth. Mowing properly will play a vital role in controlling weeds and encouraging the new grass to choke out these temporary weeds.
The one-third rule when mowing must be followed. With the lawn mower blades sharp, no more than 1/3 of the grass height should be cut at any one time. Always ensure that the new grass is cut on the mower’s highest setting. Subsequent cuttings should be done often, with the grass clippings being mulched in — not bagged. The unbagged or mulched grass clippings act as compost for the new lawn.
The new grass will need an application of balanced fertilizer after the first mowing and again 30-40 days later. The development of a healthy lawn can be achieved through the use of 3 scheduled applications of a slow-release fertilizer throughout the season. Apply fertilizer on the lawn when it is dry and then water heavily and thoroughly. Apply at rates recommended on the bag, or at a rate of about 4lbs per 1000 square foot of lawn area. Do not over fertilize or under water.
DO NOT USE WEED KILLER ON A NEW LAWN. This is very serious. Weed control products will kill new grass in the first season. All soil contains weed seeds. The hydroseed or hydromulch slurry does not. Weeds always germinate quicker than grass, however grass will choke out weeds as it becomes established. An established lawn and a proper fertilizer program will choke out any of the remaining weeds. If you have questions about any of the products required for a healthy lawn, contact Grounds Master Inc. or any of the many qualified lawn care firms available in Saskatoon.
THE FACTS ABOUT YOUR NEWLY HYDROSEEDED SEEDED LAWN
Here’s a commonly asked question: “Will I have a fully grown lawn in a few weeks?” The realistic answer is no, especially in our short Canadian (Saskatchewan) climate. The expectation for a seeded lawn to grow is often measured against that of established sod. What few people fail to realize is that sod cannot be harvested until it has become fully developed, which can take anywhere from 3 to 4 years depending on the region.
When a property has just been hydroseeded, and the growing conditions are near perfect with adequate moisture and warmth, then it is common to see accelerated grow when compared to that of regular broadcast seeding. However, when growing conditions are not favorable, with low moisture levels, extended dry spells, or seasonally low temperatures (early spring/late fall), then seed development will be affected.
If the conditions are not favorable for seed germination, the seed will wait, while protected by the hydromulch until weather conditions improve. The affect that weather has on the grass development is no different than that placed on any other plant variety. A final comment – the establishment of a lawn should take into consideration the environmental influences placed on it. What is the grass intended for? Will the new grass be used to establish a lush golf course fairway, or provide a durable play area for children in a residential back yard. Maybe the grass will soon become the play surface in a non-irrigated park, or help establish a level of erosion control in a roadway ditch or embankment. Despite what the end use will be for the grass, or what its characteristics or traits are, in the beginning, all varieties of grass seed require the same thing – warmth, moisture, and food. It cannot survive without them.
**The best available method to seed a larger flat surface area takes the two seeding methods into consideration: First the area is Drill Seeded, then secondly, it is Hydroseeded. The combination of these two grass seeding methods has been proven to produce the best overall results – especially when moisture is limited and erosion control is paramount.
A final word: Hydroseeding is affordable and very effective, but is not always the solution for every landscape project. When considering whether or not hydroseeding is suitable for your seeding project, consider the following:
- Is the area to be seeded a minimum size of 3,000 sq/ft? Is the minimum price of $650.00 justifiable when compared to the price of sod for such a small area?
- Will the area to be seeded receive a lot of foot traffic in the weeks to come? After any type of seeding, the golden rule is always to “stay off the seeded area“. Would the installation of sod speed up your project development so that foot and animal traffic is be allowed?
- The seed composition of standard sod comes with a high percentage of bluegrass. This gives it a lush green appearance and soft texture. However, by design, sod grass is dependant on a life-time supply of regularly scheduled watering and will not tolerate periods of drought. Hydroseeding allows for the seeding of any grass seed or wildflower. You can customize the type of grass for your project.
- Is the area to be seeded ridden with steep hills or narrow ditches? Hydroseeding was designed to handle extreme conditions where all other seeding and sodding methods would fail.
- Is the area to be seeded properly prepared? Do you have the minimum recommended amount of topsoil (4 inches) for the seed to develop? Have you properly packed the topsoil and then loosened the top 1/2 inch as a suitable seeded. Note: You cannot successfully hydroseed over existing grass or plant material. Proper soil preparation is always required. Understand that the hydroseeding process is different than over-seeding an existing lawn. Hydroseeding can be used in over-seeding, but the soil preparation is different.
- Would Drill Seeding be better suited for your project needs? (See Drill Seeding service information). Is the area to be seeded very large? Drill Seeding is the most economical and effective method to seed large scale projects within a limited budget.
Over-seeding facts description to come.